Avatar

Lesley Vedder

  • Total activity 43
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 24

Activity overview

Latest activity by Lesley Vedder
  • Avatar

    Lesley Vedder created an article,

    Turn the scanner off

    The next video shows how the light sequence looks when you turn off your Scanner device. When the scan button is pressed for more than 3 sec the scanner will shut down. the scanner will make a beep...

  • Avatar

    Lesley Vedder created an article,

    Scanner is ready to scan

    When the scanner is connected to the phone and inside the app the scan menu has been started the scanner is ready to start the scanning process. The scanner can only start the scanning process when...

  • Avatar

    Lesley Vedder created an article,

    Scanner is ready for Bluetooth connection

    After the start up sequence the scanner is ready for the Bluetooth connection with the smart phone (how to connect the phone an scanner). The battery light is now on continuously, the Bluetooth lig...

  • Avatar

    Lesley Vedder created an article,

    Start up of the scanner

    When you start up the scanner is performs a internal system check. This starts when the scan button has been pressed for >3 seconds. It starts with a beeping sound and blinking simultaneously of...

  • Avatar

    Lesley Vedder created an article,

    3 scanner lights

    On the Scanner handle are 3 lights located that indicate the status.    Scan button light (green led). Indicates when the scanner is ready to start scanning Bluetooth light (blue led). The light i...

  • Avatar

    Lesley Vedder created an article,

    The lights on the scanner

    On the Scanner handle are 3 lights located that indicate the status.    Scan button light (green led). Indicates when the scanner is ready to start scanning Bluetooth light (blue led). The light i...

  • Avatar

    Lesley Vedder created an article,

    How does the scanner receive data?

    The following link will guide you to an article on our website. The article explains how the scanner collects data and how this data produces a report. 

  • Avatar

    Lesley Vedder created an article,

    How can I set the geolocation of my field?

    Make sure your location is activated in your phones settings. The phone needs to know where you are. Start the app and navigate to the section where you can define a new field, or edit an existing ...

  • Avatar

    Lesley Vedder created an article,

    I can't scan the calibration cap, what do I do?

    Check if the calibration cap is properly cleaned. Please follow the instructions as provided on the screen of your phone. If you need to clean the calibration cap, use a cleaning brush or a bit (dr...

  • Avatar

    Lesley Vedder created an article,

    My report does not arrive, what do I do?

    Under normal working conditions, a report should be generated within 21 seconds after uploading the scans. If you're scanning offline, then please be reminded to synchronize the app after being con...